ZKF 661 LX/LN
Ceramic glass hob
Installation and Operating Instructions
319 637 600-NO - 0702-01
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
The Key Features of Your Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Description of the hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Cooking zones and control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Before Using for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Initial Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Operating the Hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Ring Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Cooking on the Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Switching on the Dual-ring Cooking Zone . . . . . . . . . . . . . . . . . . . . . . . 77
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Uses, Tables and Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Hob Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Rectifying faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Regulations, Standards, Directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Safety Instructions for the Installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
69
Operating Instructions
1 Safety
The safety aspects of this appliance comply with accepted technical
standards and the German Appliance Safety Law. However, as manu-
facturers we also believe it is our responsibility to familiarise you with
the following safety instructions.
Electrical Safety
• The installation and connection of the new appliance must only be
carried out by qualified personnel.
• Repairs to the appliance are only to be carried out by approved
service engineers. Repairs carried out by inexperienced persons
may cause injury or serious malfunctioning. If your appliance needs
repairing, please contact your local Service Centre or your dealer.
Please follow these instructions, otherwise the warranty is void in the
event of damages.
3
• Flush-mounted appliances may only be operated following installa-
tion in suitable installation cabinets and workplaces which conform
to the relevant standards. This ensures sufficient protection against
contact for electrical units as required by the VDE [Association of
German Electrical Engineers].
• If your appliance malfunctions or if fractures, cracks or splits appear:
– switch off all cooking zones,
– disconnect the hob from the electricity supply.
Child Safety
The cooking zones will become hot when you cook. Therefore, always
keep small children away from the appliance.
70
Safety During Use
• This appliance may only be used for normal cooking and frying in
the home. It is not designed for commercial or industrial purposes.
• Do not use the hob to heat the room.
• Take care when plugging electric appliances into mains sockets
near the hob. Connection leads must not come into contact with the
hot surface.
• Overheated fats and oils catch fire quickly. You should supervise
cooking when preparing foods in fat or oil (e.g. chips).
• Switch off the cooking zones after use.
Safety When Cleaning
• For safety reasons do not clean the appliance with a steam jet or
high pressure cleaner.
• Clean the hob in accordance with the maintenance and cleaning in-
structions in this manual.
71
To Avoid damaging your appliance
• Do not use the hob as a work surface or for storage.
• Do not operate the cooking zones when there is no pan or the pans
are empty.
• Glass ceramic is insensitve to temperature shock and very robust;
however it is not unbreakable. Especially sharp and hard objects
that fall on the cooking surface can damage it.
• Do not use cast iron pans or pans with a rough, burred or damaged
base. Scratching may occur if the pans are slid across the surface.
• Do not place any pans on the hob frame. Scratching and damage to
the paint may occur.
• Make sure that no acidic liquids, e.g. vinegar, lemon or descaling
agents, are spilt onto the hob frame, since these cause dull spots.
• If sugar or a preparation with sugar comes into contact with the hot
cooking zone and melts there it must be cleaned off immediately
with a scraper while it is still hot. If it cools, the surface may be dam-
aged when it is removed.
• Keep all items and materials that can melt away from the ceramic
glass surface, e.g. plastics, aluminium foil, or oven foils. If some-
thing of this nature should melt onto the ceramic glass surface, it
must also be removed immediately using the scraper. Always use a
ceramic glass scraper with care.
72
2 Disposal
Disposing of the packaging material
• All parts of the packaging can be fully recycled; foil and expanded
polyurethane parts are appropriately identified. Please dispose of
packaging material and, if appropriate, your old appliance properly.
• Please follow the national and regional regulations and material
identification (material separation, refuse collection, waste disposal
sites).
Information on disposal
• The appliance must not be disposed of with household rubbish.
• You can obtain information about collection dates or public refuse
disposal sites from your local refuse department or council.
• Warning! Before disposing of old appliances make them inoperable.
Remove the mains lead.
73
The Key Features of Your Appliance
• Ceramic glass cooking surface: The appliance has a ceramic
glass cooking surface and 4 rapid response cooking zones. The par-
ticularly powerful radiant heater elements significantly shorten the
amount of time taken for the zones to heat up.
• Cleaning: The advantage of the glass ceramic cooking surface is its
easy cleaning. The smooth surface is easy to keep clean (see sec-
tion: “Cleaning and care”).
• Double-ring cooking zones: The cooking surface utilises two dou-
ble-ring cooking zones. This provides the appliance with cooking
zones of variable sizes, for instance for smaller pots, which saves en-
ergy.
• Residual heat indicator: The residual heat indicator lights up if the
cooking zone becomes so hot that there is a risk of burning. The re-
sidual heat indicator will not illuminate if there is a power cut, even if
there is still a risk of burning..
74
Description of the hob
Cooking zones and control panel
Double-ring Cooking Zone 700/1700W
Single Cooking Zone 1200W
Single Cooking
Zone
1200W
Double-ring
Cooking Zone
750/2200W
Four Residual Heat Indicators
(separate for each zone)
Control
Knobs
Control Knob for Rear Right Cooking Zone
Control Knob for Rear Left Cooking Zone
Control Indicator
for Double-ring Cooking Zone
Control Knob
Control Knob
for Front Left Cooking Zone
for Front Right Cooking Zone
Control Indicator for Double-ring Cooking Zone
75
Before Using for the First Time
Initial Cleaning
Wipe the ceramic glass surface with a damp cloth.
Important: Do not use any caustic, abrasive cleaners! The surface
could be damaged.
1
Operating the Hob
When a cooking zone is switched on, it may hum briefly. This is a
characteristic of all glass ceramic cooking zones and does not impair
either the function or the life of the appliance.
3
Ring Switches
• The heat settings are continuously variable be-
tween settings 1-10.
1 = lowest power
10 = highest power
K= double ring switching
Cooking on the Zones
1. Select a high setting for heating up / browning.
2. As soon a steam starts to form or the oil is hot, turn
back to the heat setting necessary for further cook-
ing.
3. To stop cooking, turn back to the zero position.
Switch off the cooking zone approx. 5-10 minutes
2
before the end of the cooking to make use of the
residual heat. By this means you can save electric-
ity.
76
Switching on the Dual-ring Cooking Zone
The switch for the dual-ring cooking zone is switched on by turning
clockwise and must not be turned past the stop!
1
1. Turn the switch for the dual-ring cooking zone
clockwise. Turn past position 10 to the „dual-ring“
symbol until it stops.
2. Then turn back to the required heat setting for
cooking.
3. To stop cooking, turn back to the off position.
The next time the dual-ring cooking zone is re-
quired, repeat the above procedure.
3
Residual heat indicator
The ceramic glass hob is equipped with a residual heat indicator, a
control lamp is allocated to each cooking zone. This lights up as soon
the corresponding cooking zone is hot and warns against inadvertant
contact.
The residual heat indicator only goes out when the cooking zone has
cooled down even when the cooking zone is switched Off.
You can use the residual heat for melting and keeping food warm.
2
1
Important! As long as the residual heat indicator is illuminated, there
is a risk of burns.
Important! If the power supply is interrupted the residual heat indica-
1
tor also goes out and information about residual heat will no longer be
available. However, it is still possible to burn yourself. This can be
avoided by being particularly attentive.
77
Uses, Tables and Tips
Pans
The better the pan, the better the results.
• You can recognise good pans by their bases. The base should be as
thick and flat as possible.
• Pay particular attention when buying new pans to the diameter of
the base. Manufacturers often give only the diameter of the upper
rim.
• Pots with aluminium or copper bases can cause metallic discolour-
ing on the ceramic glass surface, which is very difficult or impossible
to remove.
• Do not use cast iron pans or pans with a rough, burred or damaged
base. This can produce permanent scratching if the pan is slid
across the surface.
• When cold, pan bases are normally bowed slightly
inwards (concave). They should never be bowed
outwards (convex).
• If you wish to use special types of pan (e.g. a
pressure cooker, simmering pan, wok, etc.),
please observe the manufacturer's instructions.
Energy saving tips
You can save valuable energy by observing the following points:
2
• Always position pots and pans before switching on the cooking
zone.
• Dirty cooking zones and pan bases increase
power consumption.
• Whenever possible always position the lids firmly
on pots and pans to cover completely.
• Switch off the cooking zones before the end of the
cooking time to use the residual heat such as to
keep foods warm or for melting.
• The base of the pan should be
the same size as the cooking
zone.
• Using a pressure cooker reduces
cooking times by up to 50%.
78
Charts
Settings for Cooking on the Zones
The setting position required for cooking processes is dependent on
the quality of the pots and on the type and amount of the food.
Heat
setting
Cooking method
Parboiling
Examples
Starting of cooking and roasting, cooking of large
quantities of liquid, then switch-back to appropri-
ate setting
9-10
Frying
Quick frying
French fries, pan-cakes
Fillet of pork and beef, steaks goulash
8-9
7-8
5-6
4-5
Roasting
Frying without
crust
Frying of meat, schnitzel, cutlets, meat-balls,
sausages, liver, fish-fillet in deep fat, Frying eggs
or chops
Boiling
Braising
Boiled potatoes, stews, soups, hot-pot, sauces in
large quantities
Simmering of vegetables, braising of meat, lightly
cooking
Simmering
Stewing
small amount of fruit with little liquid
Simmering of rice and food with milk (sometimes
stirring), Stewing of smaller amount of potatoes or
vegetables, Warming up of prepared meal
Gentle
simmering
3-4
Omelette, fried eggs, Hollandaise sauce, Keeping
warm a meal or small amount of hot-pot
Melting of butter, chocolate, gelatine.
1-2
0
Melting
Residual heat, OFF-position
When heating up or frying, we recommend heat setting “10", and then
continue cooking foods at an appropriate lower heat setting.
3
79
Cleaning and Care
Hob
Important: Cleaning agents must not come into contact with the hot
1
ceramic glass surface! All cleaning agents must be removed with
plenty of clean water after cleaning because they can have a caustic
effect when the zones are next heated!
Do not use any aggressive cleaners such as grill or oven sprays,
coarse scourers or abrasive pan cleaners.
Clean the ceramic glass surface after each use when it is warm to the
3
touch or cold. This will avoid spillages becoming burnt on.
Remove scale and water marks, fat spots and discolouration with
a metallic shimmer using a commercially available ceramic glass
cleaner such as “Hob Brite”.
Light Soiling
1. Wipe the ceramic glass surface with a damp cloth and a little washing
up liquid.
2. Then rub dry with a clean cloth. Remnants of cleaner must not be
left on the surface.
3. Thoroughly clean the entire ceramic glass cooking surface once a
week with a commercially available ceramic glass or stainless steel
cleaner.
4. Then wipe the ceramic glass surface using plenty of clean water
and rub dry with a clean fluff-free cloth.
Stubborn Soiling
1. To remove food that has boiled
over or stubborn splashes, use a
glass scraper.
2. Place the glass scraper at an angle
to the ceramic glass surface.
3. Remove soiling by sliding the
blade.
You can obtain glass scrapers and
ceramic glass cleaners from spe-
cialist retailers.
3
80
1 Problem Dirt
1. Remove burnt-on sugar, melted
plastic, aluminium foil or other melta-
ble materials with a glass scraper
immediately and while still hot.
Important: There is a risk of burning
yourself when the glass scraper is
1
used on a hot cooking zone!
2. Then clean the hob normally when it
has cooled down.
If the cooking zone on which
something has melted has already
3
cooled down, warm it up again for cleaning.
Scratches or dark marks on the glass ceramic surface, caused for ex-
ample by a pan base with sharp edges, cannot be removed. However,
they do not impair the function of the hob.
Hob Frame
Important! Do not put vinegar, lemon-juice or scale removers on the
hob frame, otherwise dull spots will appear.
1
1. Wipe the frame with a damp cloth and a little washing up liquid.
2. Soften dried dirt with a wet cloth. Then wipe off and rub dry.
81
What to do if ...
Rectifying faults
It is possible that faults have been caused by a minor error, which you
can correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
Warning! Repairs to the appliance are only to be carried out by ap-
1
proved service engineers. Improperly effected repairs may result in
considerable risk to the user. If your appliance needs repairing, please
contact your specialist dealer or local Service Centre.
What to do when …
.... the cooking zone does not function?
Check whether
– the fuses in the house installation (fuse box) are intact. If the fuses
switch off, or blow, several times, please call an authorized electrical
technician.
– the corresponding cooking zone is switched ON and the desired de-
gree of heat has been set.
– for cooking zones with several rings, whether the heating circle has
been switched On.
If a service engineer makes a visit due to incorrect operation, a charge
will be made even if the appliance is still within the guarantee period.
82
Installation Instructions
Important! The new appliance may only be installed and connected
by qualified personnel.
1
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
Technical Data
Appliance Dimensions
Width
Depth
Height
572 mm
502 mm
49 mm
Cut-Out Dimensions
Width
Depth
Corner radius
560 mm
490 mm
R5
Power Consumption
Front left cooking zone ø 120/210 mm
Back left cooking zone ø 145 mm
Back right cooking zone ø 120/180 mm
Front right cooking zone ø 145 mm
750/2200 W
1200 W
700/1700 W
1200 W
Heating Element Voltage
230 V ~50 Hz
6,3 kW
Total Connected Load max.
83
Regulations, Standards, Directives
This appliance meets the following standards:
• EN 60 335-1 and EN 60 335-2-6
relating to the safety of electrical appliances for household use and
similar purposes and
• EN 60350, or DIN 44546 / 44547 / 44548
relating to the operating features of electric cookers, hobs, ovens,
and grills for household use.
• EN 55014-2
• EN 55014
• EN 61000-3-2
• EN 61000-3-3
relating to basic requirements for electro-magnetic compatibility
protection (EMC).
This appliance complies with the following EU Directives:
• 73/23/EWG dated 19.02.1973 (Low Voltage Directive) including
;
Amending Directive 90/683/EWG
• 89/336/EWG dated 03./05.1989 (EMC Directive
including Amending Directive 92/31/EWG).
84
1 Safety Instructions for the Installer
• A device must be provided in the electrical installation which allows
the appliance to be disconnected from the mains at all poles with a
contact opening width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses
(screw type fuses are to be removed from the holder), earth leakage
trips and contactors.
• In respect of fire protection, this appliance corresponds to type Y
(EN 60 335-2-6). Only this type of appliance may be installed with a
high cupboard or wall on one side.
• Drawers may not be fitted underneath the hob.
• The installation must guarantee shock protection.
• The kitchen unit in which the appliance is fitted must satisfy the sta-
bility requirements of DIN 68930.
• For protection against moisture, all cut surfaces are to be sealed
with a suitable sealant.
• On tiled work surfaces, the joints in the area where the hob sits must
be completely filled with grout.
• On natural, artificial stone, or ceramic tops, the snap action springs
must be bonded in place with a suitable artificial resin or mixed ad-
hesive.
• Ensure that the seal is correctly seated in the frame and that it is
seated against the work surface without leaving any gaps. Addi-
tional silicon sealant must not be applied; this will make removal
more difficult when servicing.
• The hob must be pressed out from below when removed.
85
Electrical Connection
Before connecting, check that the nominal voltage of the appliance,
that is the voltage stated on the rating plate, corresponds to the avail-
able supply voltage. The rating plate is located on the lower casing of
the hob.
The heating element voltage is AC230 V ~. The appliance also works
perfectly on older networks with AC220 V ~.
The hob is to be connected to the mains using a device that allows the
appliance to be disconnected from the mains at all poles with a con-
tact opening width of at least 3 mm, eg. automatic line protecting cut-
out,earth leakage tripsorfuse.
A type H05VV-F cable or one with a higher grade must be used as the
mains connecting cable.
The connection must be carried out as shown in the diagram. The
connecting links should be fitted according to the appropriate con-
nection diagram. The earth lead is connected to terminal x. The
earth lead must be longer than leads carrying electric current.
The cable connections must be made in accordance with regula-
tions and the terminal screws tightened securely.
Finally, the connecting cable is to be secured with the mains cable
cleat and the covering closed by pressing firmly (lock into place).
Before switching on for the first time, any protective foil or stickers
must be removed from the glass ceramic surface.
Once connected to the mains supply check that all cooking zones are
ready for use by briefly switching each on in turn at the maximum set-
ting.
1
86
87
Rating Plate
88
Service
In the “What to do if …” section a number of malfunctions are listed
that you can rectify yourself Look there first if a fault occurs.
Is it a technical fault?
If so, please contact your customer service centre. (You will find
addresses and telephone numbers in the section “Customer Service
Centres”.)
Always prepare in advance for the discussion. This will make diagno-
sis of the problem easier and also make it easier to decide if a custo-
mer service visit is necessary:
Please make a note of the following
information as accurately as pos-
sible:
• What form does the fault take?
• Under what circumstances does
the fault occur?
Prior to the telephone call it is impor-
tant that you make a note of the fol-
lowing appliance code numbers that
are given on the rating plate:
• PNC code (9 digits),
• S No code (9 digits).
We recommend that you record the code numbers here so that you al-
ways have them to hand:
PNC . . . . . . . . .
S No . . . . . . . . .
When do you incur costs even during the warranty period?
• if you could have remedied the fault yourself using the fault table
(see section “What do I do if ...”),
• if the customer service technician has to make several journeys be-
cause he was not provided with all the relevant information before
his visit and therefore, forexample, has to fetch spare parts. These
multiple trips can be avoided if you prepare your phone call as de-
scribed above.
89
Montage / Assembly
90
91
Ausbau/Removal/Démontage/Demontage
92
|